Screwdrivers

Magnetic TM-TT-02

Magnetic screwdriver for Totem bolts
Phillips 2mm TM154

For screwing in N20 motors to bracket.
Wrench TM360

For tightening nuts and lock nuts.

Totem Wrench

Small Totem Wrench for tightening nuts and standoffs or holding them in place. Additional plastic Socket Wrench is handy in certain situations.

Phillips screwdriver

Use Phillips screwdriver for attaching Bracket 2 V.3 to N20 motor.

Totem Screwdriver

Totem designed hex screwdriver with ergonomic design and strong magnetic grip. Makes handling easy by firmly holding bolt in place.

Push nuts into beam with help of the screwdriver. Use your fingers to enter the first rectangular slot. Then push the nut in, using the back of the screwdriver. The nut almost always tilts, so use your finger to straighten it. Then push it all the way in.

When you get the hang of it, try pushing the nut holding the screwdriver in an angular position, like it is shown in the picture. That way you avoid tilting problem.

What about getting them out? Use the tip (hex bit) of the screwdriver to push the nut out 2/3 of the slot. Then pull the nut by the thread.